Table of Contents
Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (indicator light
will be flashing and a voice prompt will be heard).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by holding down the reset button for 5 seconds until you hear the voice
prompt, "Ready to be connected".
Add device through network
5. Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6. Select the product type from the list of options in the app (Other > Pet Treat
Dispenser).
7. Ensure that the device is in pairing mode, with the light indicator flashing, and tap
"Confirm light is rapidly flashing".
10
Advertisement
Table of Contents
