Kogan SMARTERHOME KASPTDISPWA User Manual page 12

AP mode connection steps
Set device in pairing mode
You can manually set the device in pairing mode by pressing and holding the reset button
for 5 seconds until you hear the voice prompt, 'Ready to be connected'.
Using AP Mode to add device
1. Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
2. Select the product type from the list of options in the app (Other > Pet Treat
Dispenser), and then select "Other Mode" from the top-right corner when asked to
reset the device.
12