Table of Contents
Advertisement
8. Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important
that your SmarterHome™ device and the app are must be connected to the same
Wi-Fi network during setup.
9. Tap "Continue". The mobile phone will display a QR code. Hold the treat dispenser
20–30 cm in front of the mobile phone for the camera to scan the QR code. Tap "I
Heard a Prompt" when you hear an audio notice from the feeder.
10. The device will commence the pairing process and connect to the app. Ensure your
Wi-Fi router, mobile phone, and the Kogan SmarterHome™ device are kept close
until the connection is complete.
11. After successfully being added, you will have the option to rename the device and
assign it to a location. It will now be listed on the app's home page. Tap the device
listing to enter its control page.
Notes:
• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.
If you are unable to pair the treat dispenser after several attempts using this method, try
using the AP mode connection steps outlined on the next page.
11
Advertisement
Table of Contents
