Victron energy Pylontech US3000 Manual page 4

Hide thumbs Also See for Pylontech US3000:

Last

update:

battery_compatibility:pylontech_phantom https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom?rev=1659337101

2022-08-01

08:58

You can connect multiple battery modules together to form a single large battery by connecting the

RJ-45 cable supplied by Pylontech using the link ports on the battery. This is shown in more detail in

the

example wiring diagram

The communications for UP2500 can be paralleled up to 20 modules per string (and cannot use the

LV-HUB). Other models can connect up to 8 battery modules (see Pylontech data sheets), in those

models when using more than 8 parallel units, some limitations, additional conﬁguration or equipment

(e.g. Pylontech LV-Hub) may apply. See your Pylontech dealer, and Pylontech documentation for more

details.

The batteries will automatically detect and link to each other, no adjustment of dip switches on the

battery module are necessary.

The battery with the empty link port 0 is the master battery.

Type A cable

The Victron VE.Can to CAN-bus BMS type A Cable, part number ASS030710018 is used for connection

with US2000C / US3000C / UP5000 / Force-L.

Type B cable

The Victron VE.Can to CAN-bus BMS type B Cable, part number ASS030720018 is used for connection

with US2000 / US3000 / UP2500;

Note you cannot use the comms cable supplied by Pylontech for this connection between the master

battery and the GX device.

Connections

https://www.victronenergy.com/live/

and Pylontech manual.

Printed on 2022-08-21 04:41

Table of Contents