Leupold RX-1200i Complete Operation Manual page 15

Dna compact digital laser rangefinder

To initiate rangefinder setup mode, press the POWER button to activate the

unit, then press and hold the MODE button for 2 seconds to enter the Quick Set

To manipulate a function, press and release the MODE button until that

function is flashing, then use the POWER button to change the setting. If this

is the last function to be changed, you can allow the rangefinder to sit idle

for 20 seconds which will cause an automatic power-off, saving all selections.

If additional functions require manipulation, simply press MODE to continue

through the Quick Set Menu. Pressing and holding MODE for 1 second at

any time will save all changes, exit the Quick Set Menu, and prepare the

rangefinder for immediate use.

To reset your RX-1200i to factory settings, Press POWER to activate the

rangefinder, press and hold MODE, then press and hold POWER. A 10-second

countdown timer will appear; factory reset will occur after 0 has been reached.

Note:

Activating certain modes automatically disables other modes. For example

activating the yards mode will automatically deactivate the meters mode.

Table of Contents

Rx-1200i tbr/w