Advertisement
CONTINUOUS MEASUREMENT OF A MOVING TARGET / SCAN MODE:
Follow the instructions for "Measuring distance..." as explained previously .
1 . Once the target has been measured, continue to hold down the POWER
button and follow the object as it moves .
2 . The distance will automatically update as long as the POWER button is
continuously depressed .
3 . This procedure can also be used to obtain the range of multiple animals
or objects; simply move the reticle from one target to another while
holding down the POWER button .
CLEARING THE LAST DISTANCE OBTAINED:
The last range reading taken does not need to be cleared before reading
another object's distance . For that reason, there is no reset button . Simply aim at
the new object using the reticle, depress the POWER button and hold until the
new range reading is displayed .
The ranging accuracy of all Leupold RX -1200i Series rangefinders is ± 0 .5 yards/
meters at distances less than 125 yards/meters, while the accuracy beyond 125
yards/meters is ± 2 yards . The maximum range of the unit depends on the
reflectivity of the target and atmospheric conditions .
8
Advertisement
