METRON PC03X User Manual

INTRODUCTION

METRON PC03X, PC04X and PC05X are extremely compact & light weight "adaptor style" portable EV charging stations designed to charge electric vehicles from any
household outlet (e.g. Schuko) or industrial socket (e.g. 1 or 3-phase CEE sockets) using standard Type2-Type2 or Type2-Type1 charging cables that are used for
charging EVs from regular wall mounted or standalone charging stations.
PC03/4/5X portable EV charging stations actually convert any power outlet/socket to EV charging station with maximum user safety features. This truly unique design
saves space and weight as PC03/4/5X replace regular cable type portable chargers. METRON portable EV charging stations also offer the possibility to set desired
charging current/power by simply pressing a button.

GET STARTED

First plug the portable EV charging station in the wall outlet. Immediately signal LED starts blinking: number of blinks tells you what is the saved charging
power/speed setting (see the next page). Afterwards LED glows constantly till AC power is present indicating standby/ready status. Then insert the male side of your
charging cable into portable EV charging station's Type 2 socket and the other side of charging cable into vehicle's charging socket. When everything is connected
LED starts blinking slowly what means the vehicle is charging. When your electric vehicle is fully charged the LED glows constantly again.

SETTING THE DESIRED CHARGING CURRENT/POWER

METRON portable EV charging stations allow users to set desired charging current/power, before being plugged in the electric vehicle charging socket socket. Procedure is
NASTAVITEV ŽELENEGA POLNILNEGA TOKA/MOČI
simple:
• press and hold the push button: LED switches o immediately
• after 5 seconds LED starts blinking slowly
• Releasing the push button after a certain number of blinks determines charging current/power as follows:
PC03X
Number of Charging
LED blinks current/power
1 6 A / 1,4 kW
2 8 A / 1,8 kW
3 10 A / 2,3 kW
4 13 A / 3,0 kW
5 16 A / 3,7 kW*
* 16A available only in case wall plug contains a temperature sensor.
New charging current/power setting is stored in the memory and it stays the same (even after the power supply is not present anymore) until
the next setting change is performed.

STATUS NOTIFICATION BY LED BLINKS

LED STATUS
Slow blinking when power supply is applied
Constantly on when not plugged in
Slow blinking when plugged in
Constantly on when plugged in
Slow blinking 2 times when plugged in
Slow blinking 3 times (plugged in or not plugged in)
PC03X, PC04X, PC05X
Portable EV Charging Stations
PC04X
Number of Charging
LED blinks current/power
1 6 A / 1,4 kW
2 8 A / 1,8 kW
3 10 A / 2,3 kW
4 13 A / 3,0 kW
5 16 A / 3,7 kW
6 20 A / 4,6 kW
7 25 A / 5,8 kW
8 32 A / 7,4 kW
NOTIFICATION
Indicating previous saved current setting
Stand-by / Ready to charge
Charging
Electric vehicle fully charged
Electric vehicle requests room ventilation (no charging)
Portable charger overheated (no charging); restarts charging automatically when it cools down
www.eauto.si
PC05X
Number of Charging
LED blinks current/power
1 3 x 6 A / 4,1 kW
2 3 x 8 A / 5,5 kW
3 3 x 10 A / 6,9 kW
4 3 x 13A / 9,0 kW
5 3 x 16A / 11,0 kW
info@eauto.si +386 51 320 538
USER MANUAL
LED light
Push Button