Advertisement
NOMENCLATURE AND FUNCTION
Front view
Control Panel
Buttons
When the On Screen Display (OSD) Menu is displayed:
These buttons are used to increase or decrease the
value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness
SELECT button
This button is used to select menu options when the
OSD Menu is displayed.
MENU button
This button is used to pop-up, select and close the
OSD Menu.
INPUT button
Use this button to switch between input signal terminals.
(INPUT 1
Power button
This button switches the monitor
ON and OFF.
Power LED
Green light: In use
Orange light: Power saving mode or
signal failure
Lamp off: Power OFF
INPUT 2)
Front view
Ventilation
openings
Ventilation
openings
Security lock anchor
By connecting a security lock (purchased separately) to the security lock
anchor, the monitor is fixed so that it cannot be transported.
The theft prevention hole works in conjunction with Kensington Micro Saver
Security Systems.
Adjusting the angle of the monitor
Lightly holding both sides of the monitor,
adjust it to a suitable viewing angle.
Note: When adjusting the angle, be
sure to hold the green section only.
Pressure from hands on the LCD
panel could cause damage.
Note: Never block the ventilation
openings as this may lead to
overheating inside the monitor
and result in malfunction.
Power terminal
Remove the cover to see the power terminal.
The AC adapter is connected here.
INPUT 2 terminal and USB port
Remove the cover to view the computer
input terminal (INPUT 2) and USB port.
INPUT 2 terminal
A second computer can be connected here.
USB port: Downstream
A USB device can be connected here.
USB port: Upstream
A USB-ready computer or self-powered
USB hub can be connected here.
RGB signal cable: INPUT 1
This is to be connected to the computer's
(i.e. PC etc) analog RGB output terminal.
30
5
45
45
Advertisement
