Table of Contents
Advertisement
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch the sound enhancement to your preference.
*E.A.M.: Enhanced Audio Mode
DVD-V
DVD-A
Selecting the sound enhancement
VCD
CD
1
Press E.A.M.
The sound enhancement selection
E.A.M.
appears.
2
Press E.A.M. or
select the sound enhancement.
E.A.M.
Normal sound.
ENTER
To obtain expansive virtual surround
sound effects from just two
speakers.
To control dynamic range to make
dialogues easier to hear (only when
playing a DVD video disc recorded
on the Dolby Digital recording
system).
• To use this enhancement on
sounds output from the
BITSTREAM/PCM (DIGITAL)
AUDIO OUT jack, be sure to set
"Analog Output" to "Stereo"
and "Digital Output" to "PCM".
/
repeatedly to
Normal:
3D:
Dialogue:
61
62
To turn off the audio enhancement selection
Press ENTER.
ENTER
Alternatively leave the DVD player unoperated for about
5 seconds after having made the selection.
Notes
• Actual effects to sounds may vary depending on the
speakers. Make the selection to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD player is connected to an amplifier equipped
with Dolby Surround Pro Logic, select "Normal".
Otherwise, Dolby Surround Pro Logic may function
differently than usual.
• Selecting "Dialogue" disables "Dynamic Range Control"
function
.
62
• When "Analog Output"
61
ineffective.
Spatializer
®
3-Dimensional Sound Processing provided by Desper
Products. Inc.
Certain audio features of this product manufactured under a license
from Desper Products, Inc., Spatializer
device are trademarks owned by Desper Products, Inc.
1, 2
ENTER
2
is set to "Multi," "3D" is
®
and the circle-in-square
39
Advertisement
Table of Contents
