Alesis iO4 Service Manual page 26

AI02 – Akai EIE Test Procedure version 2.1
th
December 8
Cables and Equipment:
Qty Description
1 Phantom Power Tester
1 Midi Cable
4 1/4" TS Cable
1 USB Cable
1 Insert Cable
1 Audio Signal Generator
Setup:
1. Install MaxMSP Runtime available at
2. Plug USB Cable from iO 4 into computer
3. Plug in 1/4" TS Cable from Output 1 to Line Jack on CH 1
4. Plug in 1/4" TS Cable from Output 2 to Line Jack on CH 2
5. Plug in 1/4" TS Cable from Output 3 to Line Jack on CH 3
6. Plug in 1/4" TS Cable from Output 4 to Line Jack on CH 4
7. Plug Midi Cable from Midi Out to Midi In Port.
Image
www.cycling74.com