Page 1
Zehnder Olga Electric width fixing centres 75-105 OLGE-090 OLGE-120 OLGE-155 All dimensions shown are in millimetres All stainless steel construction: 30mm x 30mm x 1.2mm headers dia 18mm x 1.2mm tubes Connections: 1.2m long flying lead (3 core) Immersion heater rating:...
Page 2
Zehnder Olga Electric This product has been manufactured in accordance with our stringent quality requirements to give you total satisfaction. To get the most out of your radiator we advise you to read these instructions carefully and keep them to hand. WARNINGS CAUTION (TOWEL DRYER): to avoid any danger to very young children, you are advised to install this appliance so that the lowest heating bar is at least 600mm off the floor.
Page 3
Zehnder Olga Electric The flexible cable supplied with your appliance is designed to be connected to the mains via a junction box that must be placed behind the appliance. In a kitchen or bathroom, the junction box must be positioned at least 25cm from the floor. The appliance must be installed as described in this document and in accordance with the applicable European and local standards as well as the rules of good professional practice.
Zehnder Olga Electric POSITIONING YOUR APPLIANCE To get the most out of your appliance and enjoy the highest standards of comfort, we recommend that you install the appliance near places with high heat loss (windows, doors, etc.) wherever possible. You will find a complete set of assembly instructions in your appliance’s box. CONNECTING THE APPLIANCE The technical specifications of your radiator are shown on its nameplate.
Zehnder Olga Electric AFTER-SALES SERVICE If your appliance stops working or you require spare parts, contact your installer or dealer. Prior to making contact and to ensure your problem is dealt with quickly and effectively, please make a note of: - the details shown on the appliance’s nameplate;...
Page 6
Zehnder Olga Electric Tools & Material Required Component Screwdriver - crosshead Wall Plug Pliers Bracket Electric drill Screw - Crosshead, 6.3mm dia x 60mm Masonry drill bit Grub Screw Spirit level Allen Key Stepladder (for taller radiators) Assembly Instructions Accurately mark out bracket holes on wall using spirit level. Drill four 10mm dia holes to a minimum depth of 70mm &...
This manual is also suitable for:
Olge-120Olge-155Olge-090-030/fOlge-090-050/fOlge-120-050/fOlge-120-065/f...
Show all