HP Visualize c100 Install Manual page 8

Hp visualize c100: install guide

Hide thumbs Also See for Visualize c100:

Table of Contents

Installing the New CPU Board

1 Line up the CPU board with the main tray guides, as shown in Figure 7.

Figure 7

Installing the New CPU Board

Lower the CPU onto the guides, as shown in Figure 7.

3 Pull the two ejector handles so that they are fully open..

4 Slide the CPU board in until it starts to make contact with the backplane..

5 Push on both ejectors evenly and firmly to seat the CPU board in the backplane

connectors.

6 Replace the CPU retaining screw as shown in Figure 7.

Table of Contents

Visualize c110