HP Visualize b180L Installation Manual page 17

J5000 and J7000 Graphics Slots
PCI slot 1 64 bits wide/33Mhz
PCI slot 2 64 bits wide/33Mhz - Tertiary Graphics Slot
PCI clot 3 64 bits wide/33Mhz
PCI slot 4 64 bits wide/66Mhz - Secondary Graphics Slot
PCI slot 5 64 bits wide/33Mhz
PCI slot 6 64 bits wide/33Mhz
PCI slot 7 64 bits wide/66Mhz - Primary Graphics Slot
PCI slot 8 64 bits wide/33Mhz
Use the Primary Graphics Slot for the highest performance graphics card. Use the Secondary
Graphics Slot for the second graphics card and then the remaining slots for any additional
supported graphics card. Do not use Slot 1 for any other I/O card except as a source of
power only.
Supported J5000 and J7000 Graphics Configurations:
• 4 Visualize EG's or
• 4 Visualize fxe or
• 1 Visualize fx2 or
• 1 Visualize fx6 with Texture Mapping or
• 2 Visualize fx6 with texture mapping or
• 3 Visualize fx6 without Texture Mapping
Chapter 1
Introduction
Installing the Hardware
17