Table of Contents
Advertisement
Connecting to your home
network automatically
If your router has a WPS function, you
can connect the appliance to your home
network automatically.
If your router does not have a WPS
function, you will need to connect the
appliance to your home network
manually ~ Page 54.
Wi-Fi must be switched on at the
appliance.
Switch the appliance on.
1.
Press and hold the Remote start }
2.
button for more than three seconds.
Aut. network log-in appears in the
display panel.
Use either of the right-hand arrow
3.
buttons to select Connect.
The appliance will now try to connect
to your home network.
Activate the WPS function on your
4.
home network router within the next
two minutes.
If the appliance has successfully
connected to the home network,
Connected è appears in the display
panel.
You can exit the Home Connect
5.
settings by selecting the
Remote start } button.
If you were not able to establish
Note:
a connection, check whether your
appliance is within range of the home
network and repeat the manual
connection. Try connecting
automatically again or connect your
appliance manually ~ Page 54.
Home Connect
en
53
Advertisement
Table of Contents
