Table of Contents
Advertisement
Steps
1. Place the fan and heat-sink assembly on the system board and align the screw holes on the fan and heat-sink assembly with
the screw holes on the system board.
2. In reverse sequential order (6>5>4>3>2>1), replace the six screws (M2x4) that secure the fan and heat-sink assembly to
the system board.
3. Turn the system-board assembly over.
Next steps
1. Install the
system
board.
2. Install the
wireless
card.
3. Install the
solid-state
4. Install the
rear
cover.
5. Install the battery.
6. Install the
base
cover.
7. Follow the procedure in
Removing the fan and heat-sink assembly (NVIDIA GeForce RTX
3050 Ti graphics card)
Prerequisites
1. Follow the procedure in
CAUTION:
For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The
oils in your skin can reduce the heat transfer capability of the thermal grease.
drive.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
49
Advertisement
Table of Contents
