Table of Contents
Advertisement
Switch LEDs
STACK LED
The STACK LED shows the sequence of member switches in a stack. Up to eight switches can be members
of a stack. The first eight port LEDs show the member number of a switch in a stack.
Figure 36: STACK LED
This figure shows the LEDs on for each switch. When you press the Mode button to select the STACK LED,
the corresponding port LEDs will blink green for each switch. For example, for switch 1, port 1 will blink
green and the rest of the LEDs will be off. On switch 2, port 2 will blink green and the rest of the LEDs will
be off. The same behavior will be seen with the remaining switches in the stack.
1
2
Stack member 1
4
Stack member 2
5
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
STACK LED
LED blinks green to show
that this is switch 1 in the
stack.
LED blinks green to show
that this is switch 2 in the
stack.
65
Advertisement
Table of Contents
