Weather Station Device Page - Bresser HomGar 7510100 Instruction Manual

➏ Home settings
Here you can:
• change your home name
• Add/delete rooms and zones for room/zone
management and assign devices to rooms and zones
• Set location (base for local weather in the app)
• Set time zone
• Invite members
• Set units
➐ Home page
Shows all important information at a glance.
➑ Plan overview page
Overview of all irrigation plans. Tap the appropriate plan to
edit it.
➒ Event page
Here you can find an event log of past activities.
➓ Profile page
This will take you to
• Home Management
• Quick guide and FAQ
• Information about setting up third-party voice services
(Amazon Alexa, Google Assistant)
• Setting language, notifications and color theme
(background color, etc.)
• Information about the app

WEATHER STATION DEVICE PAGE

➊ ➊
➋ ➋ ➌ ➌
➊ Settings
Here you can:
• Change device name
• Change the background image and font color in the "UI
DIY" section
• View device information
• Change weather station display language
• Adjust auto backlight
• Edit sensor number setting:
Adjust channel 1/2/3 sensor, adjust channel 4-9 sorting.
Tap ", " " and " " to resort and exit. To re-add a
device that has been removed from display, tap "Re-add".
• Adjust receive channel ("receive channel"): The default
channel is channel 1. If there are more gateways in an
area, for example a neighbor uses the same model's
gateway, you can set different receiving channels to
reduce the probability of communication conflicts.
• To replace the device: If the device is faulty, you can
use the "Device Replacement" function to replace the
defective device with the new one. Please pair the new
device first, then select "Device Replacement" to replace
the device as prompted by the App.
To save your settings, tap the check mark in the upper-right
corner.
➋ Sub-devices
Add new sub-devices here by tapping "+ Add device".
To go directly to the associated device page of an already
paired sub-device, tap the corresponding device name.
EN
DE
15