Ve 5/Xx Series 2 Pc Block Diagram; Principal Components And Features - HP Vectra VE5 2 Technical Reference Manual

VE 5/XX SERIES 2 PC BLOCK DIAGRAM

Keyboard
Mouse

PRINCIPAL COMPONENTS AND FEATURES

The main features of the system board are:
• supports Pentium processors of several different clock speeds (75, 90, 100, 120, 133
MHz, 150 and 166 MHz) with accompanying voltage regulator module (VRM)
• an integrated 64-bit Ultra VGA controller on the PCI bus
• an Enhanced IDE controller with two channels on the PCI bus
• a primary IDE channel for two IDE hard disk drives
• a secondary IDE channel for an IDE CD-ROM drive
• a combined controller on the ISA bus for
• 2 flexible disk drives and/or tape drives
• 2 serial ports
• 1 parallel port
• sockets for DRAM main memory: the Vectra VE 5/xx series 2 PCs provide six sockets for
main memory, allowing installation of up to 128 MB
Pentium
Processor
Host Bus
Intel Triton
82437/8FX
Chipset
PCI Bus
Intel
IDE Controller Channel 1
82371FB
PCI/ISA
IDE Controller Channel 2
Bridge
ISA Bus
SMC932
Super I/O
Controller
FDD
Parallel
Serial 1
Serial 2
Optional
256 KB
Level-Two
Cache
Memory
(8 MB -
128 MB)
CL-5436
Video
Controller
Flash
I/O BIOS
Support
Decode Flash
Logic ROM
PCI
Accessory
Board Slots
ISA
Accessory
Board Slots