Maintenance - KRESS KUE01 Safety And Operating Manual

WORK HINTS FOR YOUR
RECIPROCATING SAW
If your power tool becomes too hot, set the speed to
maximum and run a no load for 2-3 minutes to cool the
motor.
Always ensure the work-piece is firmly held or clamped
to prevent movement.
The blade guard must be held firmly against the
material being cut to reduce saw vibration, blade
jumping and blade breakage.

MAINTENANCE

Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
FOR BATTERY TOOLS
11
The ambient temperature range for the use and storage
of tool and battery is 0℃-45℃.
The recommended ambient temperature range for the
charging system during charging is 0℃-40℃.
Positec Australia Pty Limited
10 Corporate Blvd Bayswater, VIC 3153, Australia
Lithium-Ion Brushless Reciprocating Saw
KUE01 KUE01.9