KickAss KADCDC20A-CAR User Manual page 2

WARNINGS
Ÿ To avoid injury or damage to your vehicle ensure the instructions are read
carefully and understood.
Ÿ
Batteries can produce harmful vapour and explosive gases when being
charged.
Ÿ
Ensure batteries are mounted and stored in an area with good ventilation.
Ÿ
As this Charger has powerful output current, circuit protection such as fuses or
circuit breakers must be installed as near as possible to the batteries - refer to
wiring diagrams in this manual for correct fitting.
This manual will give you all of the essential information you need to own and
operate your new KickAss 20 AMP - DC-DC Charger with MPPT Solar Controller.
The purpose & features of the KickAss 20 AMP - DC-DC Charger with MPPT Solar
Controller:
u
Can charge multiple battery types:
Whether your battery is GEL, AGM, WET, CALCIUM or Lithium LiFePO .
u
Prevent your auxiliary battery from draining your start battery:
Built in voltage sensing will ensure your tart attery charges your uxiliary attery -
when the vehicle is running. It will then disconnect the start battery from the
auxiliary battery when the vehicle is not running.
u
Ensure your auxiliary battery is being fully charged and maintained:
Most modern vehicles (especially those manufactured after 2010) do not provide
the correct voltages and charge control to safely and completely charge your
auxiliary battery. The Charger overcomes this issue by boosting the charge voltage
to an optimal output level while ensuring your auxiliary battery is safely charged via
its multi-stage charge algorithm.
u
When your vehicle is not charging, charge from the inbuilt MPPT solar
controller:
Maximum power point tracking is the most efficient type of solar controller and
allows you obtain the maximum amount of charge from your solar panels. When
your vehicle is not doing the charging, the built-in MPPT solar controller will let your
solar panels do the work.
s b
1
4
a b