KickAss KADCDC20A-CAR User Manual page 10

CHOOSING THE BATTERY TYPE
The battery type setting must be confirmed during device installation. When the auxiliary
battery is connected, press and hold the Mode button for 2-4 seconds then releaase to
change the battery type setting. The selected battery type will be saved as the new
default.
The default priority setting is ALTERNATOR. To change the Solar priority, press and hold
the Solar Priority button for 2-4 seconds, then release, to set the the solar priority. The
priority setting will be saved as the new default.
CHARGING STAGE PROFILE
STAGE
BULK
ABSORPTION
FLOAT
NOTE:
When in FLOAT stage, the battery is fully charged. At float stage, when the battery voltage drops to
0.3V below the specified float voltage for the battery type connected, the charger will restart charging
form the BULK stage.
GEL AGM
100% 100%
Current Current
Until Until
14.1 V 14.7 V
Constant Constant
14.1 V 14.7 V
Until 2.6A Until 2.6A
13.5V 13.4V
at 100% at 100%
Current Current
Max Max
9
DESCRIPTION
WET CALCIUM
100%
Current Current
Until
14.4 V 15.3 V
Constant Constant
14.4 V 15.3 V
Until 2.6A Until 2.6A
13.4V
at 100% at 100%
Current Current
Max
LifePO4
100% 100%
Current
Until Until
14.5 V
Constant
14.5 V
Until 2.6A
13.6V 13.6V
at 100%
Current
Max Max