Table of Contents
Advertisement
If the misfed paper is seen from this
side, proceed to C. Misfeed in the
transport area .
If paper is misfed here, proceed to
A. Misfeed in the paper feed area .
Roller rotating knob
Downloaded from:
http://www.usersmanualguide.com/
Check the misfeed location. Remove the misfed paper
2
following the instructions for each location in the
illustration below.
A. Misfeed in the paper feed area
Push gently on both sides of the front cover and open it.
1
Carefully remove the misfed paper. Turn the roller
2
rotating knob in the direction of the arrow to assist in
removing it.
The fusing unit is hot. Take care in removing paper.
Do not touch the photoconductive drum (green portion)
when removing the misfed paper. Doing so may dam-
age the drum and cause smudges on copies.
Close the front cover by pushing both sides with your
3
hands and then close the side cover by pressing the
handle on the cover.
The misfeed (
) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
B. Misfeed in the fusing area
Push gently on both sides of the front cover and open it.
1
MISFEED REMOVAL
If paper is misfed here, proceed to
B. Misfeed in the fusing area .
31
Advertisement
Table of Contents
