Table of Contents
Advertisement
Downloaded from:
http://www.usersmanualguide.com/
For manual copy density adjustment, press the AUTO/MANUAL/
PHOTO (
/
with the light (
) and dark (
For photographs, select PHOTO (
(
) and dark (
There are 5 exposure steps indicated by 3 indicator lights. (The
indicators light up one or two at a time.)
If exposure level 2 is selected, the two left-handmost indicators for that
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.
Set the number of copies using the numeric keys.
6
A single copy can be made with the initial setting, i.e., when "0" is
displayed.
Press the CLEAR (
Press the START (
7
The number in the copy quantity display will decrease by 1 each time
a copy is made.
Press the CLEAR (
To repeat the same copy sequence for a different original, simply
replace the original and press the START (
If the paper in the paper tray runs out during the copy run , the bypass
tray can be selected using the TRAY SELECT (
How to remove the platen cover
The platen cover can be removed to allow copying of
bulky objects. To remove it, simply lift the platen cover
straight up.
To reattach the platen cover, reverse the above procedure.
NORMAL COPYING
/
) key to select MANUAL (
) keys as desired.
) and then adjust with the light
) keys as desired.
) key to clear an entry if a mistake is made.
) key.
) key to stop copying in the middle of a run.
) key.
) and adjust
) key.
15
Advertisement
Table of Contents
