Saving A User's Logo - Epson EMP-S3L User Manual

Saving a User's Logo

You can record the image that is currently being projected as a user's logo.
When a user's logo is recorded, the previous user's logo
will be erased.
PROCEDURE
A
Project the image you would like to use as the user's
logo, and then display the configuration menu.
Remote control
B
Control panel
Select "Extended" from the configuration menu, and
then select "User's Logo."
For details on this operation, refer to
Menu."
sp.34
Check which buttons on the remote control or the control panel
you can use, and the operations they perform, in the guide at the
bottom of the screen.
• If the "User's Logo Protect" function of "Password
Protect" is set to "ON," a message is displayed and the
user's logo cannot be recorded. To record a user's logo,
set "User's Logo Protect" to "OFF" first.
• If keystone correction, Zoom adjustment, or E-Zoom
and so on, have been carried out, the function currently
being performed is cancelled when the "User's Logo"
menu is selected.
66
Using the Configuration
"
sp.30