Selecting The Projection Type (Color Mode) - Epson EMP-S3L User Manual

Adjusting the Image Quality
B
Adjust the synchronization until the horizontal noise
disappears from the image.
Remote control
The sync value increases or decreases each time a button is
pressed.
C
Press the [Menu] button to exit the configuration
menu.
• Adjust the trackingg
results.
• Flickering and fuzziness may also occur when the
brightness, contrastg, sharpness, zoom, and keystone
correction settings are adjusted.
Control panel
before adjusting the sync for best

Selecting the Projection Type (Color Mode)

The following seven preset color modes are available. You can easily
obtain the optimum image quality simply by selecting the color mode that
corresponds to the projected images. The brightness of the images will
vary depending on which color mode is selected.
Mode
Photo (When computer and RGB video images are being input)
The images are vivid and brought into contrast. Ideal for projecting
still pictures, such as photos, in a bright room.
Sports (When component video, S-video, or composite video images are
being input)
The images are vivid and brought to life. Ideal for watching TV
programmes and so on in a bright room.
Presentation Ideal for giving presentations in a bright room
Theatre Gives images a natural tone. Ideal for watching films in a dark room.
Game Excels at emphasising dark gradations. Ideal for playing video
games in a bright room.
sRGBg Ideal for images that conform to the sRGB color standard
Blackboard Even if you are projecting onto a blackboard (green board), this
setting gives your images a natural tint, just like when projecting
onto a screen
Application
16