HS-3601 3D Massage Chair User's Manual Safety Precautions ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ Preparation ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ Part Names and Functions ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ Things Done before Each Massage ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ Adjusting the Massage Chair ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ Auto Mode Course ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ Auto Mode Course and Basic Massage Courses ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ Massage with Mechanical Strength (Massage Ball) ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥...
Safety Precautions Please read these precautions before use and follow it carefully. These warnings are made for your correct use of this massager in order to prevent you from any injury and damage. Please notice there are Warning and Notice used to mark the degree of possible injuries or damages and the emergency by wrong operation.
Page 3
Please unplug immediately when the massage chair is not working normally. Contact the customer care department at Osaki/Titan and speak with the customer cared department so that they may support and instruct you on the appropriate steps to resolve the issue.
Page 4
Safety Precautions Warnings Do not place it in bathrooms or other damp and humid places in order to avoid any electric shock, fire,breakdown and rust. Do not engage dismantling, repair and re-fix except the repairing technicians in order to prevent fire and electric shock. Notices Do not exceed more than 15 minutes of usage per day.
Page 5
Safety Precautions Warnings Please make sure the ground wire is in good working condition to prevent electric shock from any breakdowns or electric shortage. If the ground connection or cable is damaged do not use. When turning on the chair be sure the power cord is completely inserted into the outlet with no part of the connectors exposed.
Preparation Take out the massage chair and accessories from the packing case. Massage Chair Accessories Back Cushion Pillow Hole Cover Remote Control Stand User's Manual Assembling and Folding Backrest To put the backrest in the forward position, press Move the backrest in the direction of the arrow down on the lever at the bottom of the backrest indicates below and make sure the backrest and gently push forward.
Page 7
Preparation Assembling the Remote Control Stand Mount the remote control using the screws Finished. provided into the left arm panel (when sitting down) of the chair. Notice Please be sure the screws are are firmly tighten to prevent any damage to the remote control and detachment from the side panel.
Page 8
Preparation Placing the Massage Chair In order use the chair in the full recline position, you will require at least 70 cm behind the backrest when in the upright position and 70 cm in front of the footrest to allow for the footrest to come up to it highest position.
Part Names and Functions Massage Chair Pillow To support the head and reduce intensity of the massage Backrest Back Cushion Whole back component Provides a barrier from direct contact Shoulder with massage rollers Air massage for shoulders Hand Massager Air massage for hand. Remote Control Remote Control Stand Seat...
Page 10
Part Names and Functions Remote Control Display information 6 AUTO PROGRAMS • refresh • rejuvenate • deep 4 MASSAGE POSITIONS • relax • neck • • whole body • gentle • waist • point MANUAL Select preferred STOP massage from 5 modes. Stop all massages.(Press AUTO PROGRAM this button to stop the...
Things Done before Each Massage Switching on the Power 1.Insert the plug into the socket. 2.Turn on the switch. The power switch is located in the back of the left armrest. After the power is switched on, the “ON/OFF” button will flash. Check 1.
Adjusting the Massage Chair How to Use the RECLINER Press “▼” of the backrest to recline the backrest. Keep pressing “▼” to lay down the backrest and raise the footrest. The more the backrest is reclined, the stronger the massage head will feel.
Page 13
Adjusting the Massage Chair How to Use the FOOTREST Press “▲” of the FOOTREST to raise it. Keep pressing to raise the footrest. Press “▲” of the FOOTREST while it reaches to the suitable angle. Press “▼” to lay down the footrest Keep pressing “▼”...
Page 14
Adjusting the Massage Chair How to Use the FOOTREST Press “ ” of the FOOTREST to raise the foot at a suitable angle. Press “ ” of the FOOTREST to lay down the foot. When raising footrest,tread forward to stretch the footrest. When resetting the footrest, the footrest will be shortened automatically.
ATTO Mode Course At the Beginning When the power is switched on, the “ON/OFF” button will flash. After pressing “ON/OFF” button, the LCD will display below image. PREPARING Press ON/OFF ●The image on the right will appear ●Relax yourself when sitting on the chair and lean your head on PREPARING the backrest.
Page 16
AUTO Mode Course Once the body scan is complete, it will give 5-10 seconds to adjust the height of the starting point. Press to raise or lower the starting point. AUTO PROGRAM REFRESH REJUVENATE D E E P Press“ ”、“ ”to adjust the air strength.
Page 17
ATUO Mode Course The massage heads will return to initial position automatically after AUTO mode ends. Please turn off the power after use. Notrice Please turn off the power after using the chair to avoid any accidents from children or unauthorized people using the AUTO PROGRAM touching the remote.
AUTO Mode Course and Basic Massage Courses Suggestions: Body Scanning The computer body scan with only initiate if an AUTO program is selected. It will not work in manual mode. When the body scan is activated please stay still so that it can map your body accurately. This will allow for a effective massage.
Massage with Mechanical Strength (Massage Ball) At the Beginning After powering on, the “ON/OFF” button will flash. Press the "ON/OFF”button again and the LCD will display the following image. PREPARING 1 Press ON/OFF The default screen will show as indicated on the right.
Page 20
Massage with Mechanical Strength (Massage Ball) , Stretch and There are 3 manual functions, 3D EXTREME. Some of these massages can be used in combination with other style of massages. Please refer to the massage table. , whole , You can set the massage area from the neck waist , point.
Page 21
Massage with Mechanical Strength (Massage Ball) You can use “ ”and “ “ to adjust the 3D strength. There are 7 sections for 3D strength. You can press WIDTH to adjust the width of massage heads. There are 3 sections for the width of massage heads.
Page 22
Massage with Mechanical Strength (Massage Ball) FUNCTION COMBINATION TABLE: V → adjustable X→ unadjustable MASSAGE AREA 3D STRENGTH WIDTH SPEED MASSAGE TYPE MUNUAL FUNCTION NECK 、WHOLE、WAIST、POINT KNEAD NECK 、WHOLE、WAIST、POINT KNEAD STRETCH NECK 、WHOLE、WAIST、POINT KNEAD EXTREME NECK 、WAIST KNEAD MASSAGE TYPE MUNUAL FUNCTION MASSAGE AREA 3D STRENGTH WIDTH...
Page 23
Massage with Mechanical Strength (Massage Ball) Massage with Mechanical Strength (Massage Ball) The massage heads will return to initial position automatically after finishing the selecting function. Please turn off the power after use. Notice Please turn off the power after use to avoid any accidents from unauthorized use by children or unqualified person.
Air Massage At the Beginning Once the chair is powered ON, the"ON/OFF button will flash. On the LCD screen the image below will be displayed on the monitor. PREPARING Press ON/OFF Standby screen will be displayed Relax and and be steady as the computer scan maps the back.
Page 25
Air Massage Once the time has expired the massage heads will return to its original postion. Please turn off the power in the back after use. Notice Please turn off the power after use to avoid any accidents from unauthorized use by children or unqualified person.
Massage with Mechanical Strength (Massage Ball) and Air Conduct air massages in the course of mechanical massage Compound massage of shoulder/waist/hand/buttocks/leg Press AIR MENU button The display will indicate all areas the air massage can be applied. Choose the part you want by “ ”or“...
Maintenance and Keeping Maintenance Massage Chair It is important to inspect the cover, cushion for leaning on, back cushion, pillow and cushion Use a neutral cleanser with soft clothes to wipe the leather, remove the remained cleanser Suggestion with clean water and then clean it with dry clothes and make it air-dry. (Too much cleanser will damage the cover).
Trouble-Shooting During the course of the chair's life span, certain symptoms may arise which Warnings are perfectly normal. These are normal things to expect as the chair is used more and more. Here are few of the symptoms that can me expected. Do not dismantle, repair or tamper when this symbol is Sounds from massage heads slightly louder as it moves.
After stopping production, there are functional parts for repair massage chair itself by keeping for 6 years. Functional parts are meant to the necessary parts for keeping massage chair's functions working normally. Specification Product Massage Chair HS-3601 Type Power 100 ~ 120V (50~60Hz) 220 ~ 240V (50~60Hz)
Need help?
Do you have a question about the HS-3601 and is the answer not in the manual?
Questions and answers