HP TouchSmart 600-1155 User Manual page 14

Connector
A A/V source button
(game console
models only)
B HDMI port
(game console
models only)
C Composite audio/
video ports
(game console
models only)
D USB 2.0 ports (3)
E Gigabit
Ethernet LAN
(10/100/1G)
F Digital audio port
(SPDIF Out)
G Audio Line Out
H TV In
(TV tuner models
only)
I S-Video In
(TV tuner models
only)
J Stereo Audio In (TV
tuner models only)
K IR emitter (blaster)
(select models only)
L Computer stand
M Security lock slot
N Power connector
O Wireless keyboard
and mouse receiver
P Cable clip
8
User Guide (Features may vary by model)
Function
This button is at the top of the game console ports. Press it to choose
between HDMI as your source or composite audio/video as your source
(whichever ports you connected to).
If your game console (or TV set-top box) is HDMI-compatible, connect to
this port.
If your game console (or TV set-top box) has composite audio/video
connections, connect to these ports.
Connect USB devices (USB 2.0) such as printers, external hard disk
drives, digital cameras, and MP3 players.
Connect to the Internet through your wired network.
Connect to your home theater system or your surround sound digital
speakers. Supports 3.1, 4.1, and 5.1 speakers.
Connect external 2.0 and 2.1 powered speakers.
Connect your TV signal source to watch, record, and pause live TV. This is
an F-type coaxial TV input signal connector.
Capture analog video from a video camera, or connect to a set-top box
for TV input.
Connect audio for A/V input from a set-top box, digital video camera, or
other video device.
Adhere to your TV set-top box IR receiver area to receive the remote
control signal while watching and recording TV programs. This is not
required if you do not use a set-top box. A remote control is included with
select models only.
Slide the stand for stability and best viewing angle. The stand supports an
adjustable tilt angle between 5 degrees and 40 degrees from the vertical.
Insert a security lock (sold separately), which enables you to secure your
computer from theft and unwanted changes.
Plug the power adapter into the computer.
Preinstalled receiver for using a wireless keyboard and mouse.
Route your cables through the clip, close the connector cover, and then
route the cables through the notch in the computer stand.