Ip Console Setting - I-Tech Combo Cat6 User Manual

Dedicated kvm switch and rackmount screen technology. ip 2-console kvm
Table of Contents

Advertisement

< 1.4 > IP console setting
After the cable connection, please take the following steps to configure the IP KVM
1. Download IPKVMsetup.exe
2. Double click
IPKVMsetup.exe
• > Device Setup
Device
Device MAC address i C3:EE:D3:0D:DD:7E
Device Type
□ Enable WLAN Configuration (WLAN Devices only)
Authentication
Super user login
Super user login
Super user login
Super user login
Super user password
Super user password
Super user password
Super user password
New super user password
New super user password
New super user password
New super user password
New password (confirm)
New password (confirm)
New password (confirm)
New password (confirm)
Status: Ready.
3. Click Refresh Device to search the connected IP KVM
4. Select the M.A.C. address, which you want to setup, then click Query Device
5. Enter Super user login. The default is super
6. Enter Super user password. The default is pass
7. Enter the new super user password
8. Re-enter the new password
9. Change the desired IP address / Subnet mask / Gateway, then click Setup Device to confirm the setting to IP KVM
10. The default address is as below:-
The single IP KVM model, such as U-IP3202
11. Open Internet Explorer ( I . E . ), version 6.0 or above
12. Enter the IP KVM address into the address bar
- For Single IP -
http://192.168.l22
13. Enter username ( default is super)
Password ( default is pass )
14. After successful login to IP KVM, the user will enter the main page of IP KVM
A
The setting is enough for intranet.
If the users access KVM GUI via internet, please ask MIS for assistance and
download IP KVM user manual
to configure the IP KVM by device setup as below.
Netwoik Configuration
IP auto configuration None
Flefresh Devices
Wireless
LAN
Wireless LAN ESSID
E
•:LANWEPKey
Query Device
192.166.1.22
IP address
IP address
IP address
255.255.255.0
Subnet mask
Subnet mask
Subnet mask
Gateway 0.0.0.0
Gateway
Gateway
Configuration
Enable WEP encryption
Setup Device
OK
|
Cancel
Help
-http://192.168.L22
Authenticate Username and Password I
Username
Password
P. 4
Combo Cat6 IP KVM
V

Advertisement

Table of Contents
loading

Table of Contents