Download Print this page

Operating Instructions; Maintenance; Specifications - Lacanche CAFE MODERNE Installation, Operation And Maintenance Instructions

Advertisement

5. OPERATING INSTRUCTIONS

Switch on the power at the fused spur.
Your extractor has 6 pushbuttons which illuminate when
pressed.
Pushbutton Functions
Motor RUN ON TIMER
(OFF after 10 minutes to clear fumes)
Motor ON – TIMED INTENSIVE MODE
(Reverts automatically to speed 3 after 5 minutes)
Motor ON - SPEED 3
Maximum Speed for Normal Use
Motor ON - SPEED 2
Motor ON - SPEED 1
The extractor controller automatically switches off
the appliance if there has been no operator action
for 4 hours.
After 30 hours accumulated running GREASE
FILTER CLEANING will be signalled by all 6
indicators flashing. Reset by pressing Push-button
FAN OFF (delay).

6. MAINTENANCE

Regular maintenance is essential to ensure good performance
and long-life.
To minimise the risk of fire, all instructions relating
to cleaning the grease filters and removing grease
deposits must be adhered to.
To maintain the immaculate appearance of the extractor, and
to minimise fire risk, ensure that grease deposits on the
extractor surfaces are kept to a minimum by regular cleaning.
To clean the stainless steel surfaces of the extractor, use a
soft cloth and a suitable cleaning agent, such as a specially
produced stainless steel cleaner or washing up detergent and
warm water.
Painted surfaces should be cleaned using a soft cloth,
detergent and warm water.
Glass surfaces should be cleaned with a suitable glass
cleaning agent.
• Do not use abrasive cleaning materials or products.
• Do not use bleach based cleaning materials or
products.
Clean the grease filters in a dishwasher or by hand-washing in
hot water and detergent every 2 months - sooner if the
extractor is used extensively and filters become grease laden.
W1512 FMOD Moderne Range Hood O&M Dec 16.docx
Café Moderne Range Hoods
Installation, Operating & Maintenance Instructions
Motor OFF
Lights ON/OFF
CAUTION
Whilst you can expect years of service from mesh grease
filters, they are considered a consumable item and may
deteriorate over time and need replacement, particularly
when cleaned in a dishwasher. For dishwasher users
adhering to a 2-monthly cleaning interval we recommend
grease filter replacement every 5 years to maintain
optimum performance, even if they show no visible signs
of deterioration. For all users, filters should be replaced
whenever they exhibit signs of physical wear.
6.1. Removing the Grease Filters
The clip in grease filters have an integrated sprung latch
mechanism.
Release the latch by pulling the lever and remove the filter.
Filters are replaced by locating the fixed tabs opposite the
lever catch into corresponding slots in the extractor base and
then pushing the filter into position with the latch held open.
Once the filter is in position release the lever, allowing the
latch to engage.
6.2. Replacing Lamps
The lamps are long life LED units and are not designed for
end user replacement. In the unlikely event of failure please
call for assistance.

SPECIFICATIONS

7.
Supply Voltage:
Lighting: 12V 2.6W LED (Per Lamp):
See general arrangement drawings for lamp
quantity installed in your model.
Extractor Duct Spigot Diameter:
Total power:
Internal Motor Specifications
Airflow, nominal in free air:
Power input:
Duct Spigot diameter:
SEM1 EL Inline Duct Motor Specifications
Airflow, nominal in free air:
Power input:
Duct Spigot diameter:
SEM2 EL Wall Mounted Motor Specifications
Airflow, nominal in free air:
Power input:
Duct Spigot diameter:
SEM7 EL Wall Mounted Motor specifications
Airflow, nominal in free air: 200mm Dia Duct
Airflow, in free air via supplied 150mm reducer
Power input:
Duct Spigot diameter:
SEM8 EL Inline Motor specifications
Airflow, nominal in free air: 200mm Dia Duct
Airflow, in free air via supplied 150mm reducer
Power input:
Duct Spigot diameter:
Recommended Protective Fuse Sizes for Electrical Supply
Models installed with:
Internal Motor
Remote Motors
For more detailed specification and energy
efficiency information please refer to the
product fiche for your product
Page 4
All Models
230V~ 50Hz
12V, 2.6W
See rating plate
800 m
800 m3/hr
1,000 m
1,700 m
1,500 m
200/150mm
1,300 m
1,100 m
200/150mm
Fornair
Per lamp
150mm
3
/hr
275W
150mm
275W
150mm
3
/hr
200W
150mm
3
/hr
3
/hr
490W
3
/hr
3
/hr
250W
3A

Advertisement

loading