Table of Contents
Advertisement
Errors and Countermeasures
Trouble
(18) OPERATING HOUR
LIMIT ProPak. Exchange
necessary.
(25) No Pressure, check
water input!
(30) Q3 is out of range!
Check Q3 sensor.
(31) Tank level is incorrect!
Please check tank level
sensor!
Table 3: Display warning messages
Reason
The ProPak-R10
(Pretreatment module)
exceeded the maximum
operating hours.
No feed water pressure.
30 mins Q3 is less then 0.04
µS/cm
The tank level sensor (top )
is ON, but
(bottom) is OFF. This could
only possible if the bottom
sensor is defect.
Measure
hours.
Replace the ProPak-R10
(pretreatment module).
Reset the expired operating
hours.
Check the main water
supply. Check the pressure
sensor. Inform the customer
service.
Inform the customer service.
Inform the customer service.
28
Advertisement
Table of Contents
