Exporting Data; Prod. To Max Level; Process Visualization - MP Aquinity2 P10 User Manual

System Control Panel
5.2.4

Exporting Data

5.2.5

Prod. to max level

This tool is used to fill up the tank to the maximum level, which has been set by the two
tank level sensors.
5.2.6

Process visualization

Press the button "Export Data"
-
* Please make sure that there is a USB-stick
(max. 4 GB, in FAT-format) connected to the USB-port!
-> copy files from \Nandflash\... into \Hard Disk\...
-
Then click "CONFIRM" to save data to USB-Stick:
-
o chart data
o config.mcf
o calib.mcf
o operating hours
Press the button „Prod to max level"
-
The system will produce water until both tank level
sensors (bottom and top) are active. It is very useful
if user needs water more than 10 l at once.
Press the button „System-Status"
-
The entire process is illustrated schematically
-
Currently active components such as solenoid
-
valves, pumps appear in light green. Straight inactive
in dark green
The switched on UV lamp in
-
turquoise
22