Troubleshooting - inventum RVR551B Instruction Manual

7

troubleshooting

Breakdown
The appliance no longer works
The appliance is working
continuously.
Unusual or loud noises
Temperature in the refrigerator
is too high or too low
During normal use of the cooling appliance, different types of noises can occur that do not have any effect on the correct
operation of the appliance.
Noises that can be easily remedied:
• Noise due to the fact that the appliance is not level – position the appliance using the front adjustable feet. If necessary,
place soft material under the rear wheels, particular in case of a tiled floor.
• Friction against other furniture – move the appliance.
• Grinding of drawers or shelves – remove the shelf or drawer and then place it back.
• Noise of colliding bottles – place the bottles apart.
Noises that can be heard during normal use of the appliance are caused by the operation of the thermostat, compres-
sor (activation), cooling system (shrinkage and expansion of the material under the influence of temperature differences
and flow of cooling liquid).
Cause
There is an interruption in the power
supply.
Wrong setting of the thermostat.
The appliance is not level and stable.
The appliance is standing against
something.
Wrong setting of the thermostat.
The ambient temperature is higher or
lower than the temperature indicated
in the table with technical data.
The appliance is located in direct
sunlight or near a heat source.
The ventilation at the rear of the
appliance is hindered.
The door of the appliance is opened
too frequently or remains open for
too long.
The door is not closed properly.
The compressor does not work often
enough.
Solution
- check that the plug is properly inserted
in the socket
- check that the power cable is not
damaged
- check that there is voltage on the socket
by connecting a different appliance, such
as a night lamp
- check that the appliance is on by setting
the thermostat to the NORMAL position
Turn the thermostat to a higher position.
Level the appliance with the adjustable
feet.
Place the appliance in such a way that it is
not standing against anything.
- turn the thermostat to a different
position
The appliance is intended for operation in
an ambient temperature indicated in the
table with technical data supplied with the
appliance.
Change the location of the appliance
according to the information in the
instruction manual.
Keep the appliance 10 cm away from the
walls, for sufficient ventilation.
Open the door less often and/or reduce
the time that the door remains open.
Make sure the foods are placed in such a
way that they do not hinder the door when
it is being closed.
Check that the ambient temperature is
not lower than the range of the climate
class.
English
21
•