Loading Photo Paper; Copying Photos - Canon PIXMA TS5110 Getting Started

Table of Contents

Advertisement

Available languages

Available languages

Loading Photo Paper

Load photo paper in the rear tray.
1
Open the rear tray cover and pull out the paper
support.
2
a O pen the feed slot cover.
b S lide the right paper guide to the end.
a

Copying Photos

You can scan the printed photo and print it. You can also scan several photos and print them at once.
1
Make sure the printer is turned on.
2
Load several sheets of photo paper.
3
Use the {, }, [, or ] button to select Copy
on the Home screen, and then press the OK
button.
4
Use the { or } button to select Photo copy,
and then press the OK button.
5
Read the messages and then press the OK
button.
6
Follow the on-screen instructions to load the
printed photo on the platen glass, and then
press the OK button.
8
3
4
5
b
7
8
a L oad several sheets of photo paper with the
print side facing up.
b S lide the right paper guide to align it with the
side of the paper stack.
a
b
Close the feed slot cover.
Read the message on the printer's screen and
register the information of the loaded paper.
a P ull out the paper output tray.
b O pen the output tray extension.
a
Specify the print settings as necessary.
Press the Color button for color copying.
Press the Black button for black & white
copying.
The printer starts printing.
b

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pixma ts5100 series

Table of Contents