Warranty - For New Products; Purpose Of Product Warranty; Owner's Warranty; Excluded (Non-Warranty) Parts - DDS Calorimeters CAL3K 3K-F Installation Manual

7 WARRANTY – FOR NEW PRODUCTS
7.1

PURPOSE OF PRODUCT WARRANTY

Any part of a product is subject to ageing and eventual failure. These failures occur during normal use.
The purpose of a warranty is to protect the Owner against a part failure caused by manufacturing defects
in workmanship, material or design for a specific time.
7.2

OWNER'S WARRANTY

In the event of the Owner contracting directly with Digital Data Systems (Pty) Ltd "dds", or in the event of
the installation of a unit arising out of a contract between the Owner's Dealer or any other party on his/her
behalf and the said "dds", the Owner records that not withstanding same, this warranty is the only
warranty applicable to "dds" units and is expressly in lieu of all other warranties, expressed or implied,
including any implied warranty of merchantability or fitness for a particular purpose. No amendments or
additions to this warranty shall be binding on "dds", unless recorded in writing and signed by a duly
authorised officer of the company. "dds" agrees to repair and replace with a new or remanufactured
part, any part, other than those excluded below, which after inspection, upon its return to the factory
in Randburg, Johannesburg by the Owner or the authorised Dealer to which he/she returns the unit, is
proven to be defective.
Replacement of a defective part will be made only within the applicable warranty period of 12 (twelve)
months from date of shipment. Not withstanding anything to the contrary herein, any labour involved in
repairing or replacing a defective part will be charged at "dds" rates applicable at the time.
If upon inspection it is found that the pressure vessel was submerged in water the warranty
will automatically be null and void and the owner will be responsible for the labour and
parts charges.
7.3

EXCLUDED (NON-WARRANTY) PARTS

"dds" shall be entitled to treat this warranty as void unless the relevant warranty form (attached) is sent
by registered post to "dds" by the Owner within 10 (ten) days from date of original installation.
Regardless of warranty-status, the Owner shall be responsible for labour charges connected with periodic
maintenance requirements involving visual and functional inspection of the systems.
This warranty expressly covers the unit(s) "dds" supplied only and does not cover any other part, which
may, as a consequence of the installation and operation of the unit, become damaged in any way
whatsoever.
Special attention should be given to the safe operation of the high-pressure Vessels. The published rules
are guidelines only and enclosed in this leaflet for the convenience of the User. The manufacturer is not
responsible for any damages, consequential, indirect or direct, or loss whatsoever, resulting out of
electrical shock, Vessel explosion, or any other cause.
CAL3K-F Installation Guide V5
CAL3K Advanced Bomb Calorimeters
2022
Digital Data Systems (Pty) Ltd.
www.ddscalorimeters.com
Website: www.ddscalorimeters.com 13