Technical Specifications - ION shawcity ARA DOCK4 User Manual

Test Bays
Test LEDs
DC Jack
Ethernet Port
USB Communication Port
Purge inlet
Exhaust Outlet
Calibration Gas Pressure
Gauge

Technical Specifications

Dimension
Weight
Enclosure
Operating temperature
Humidity
Altitude
Storage temperature
Power supply
Type of equipment
RTC
Pioneering Gas Sensing Technology.
Test Bays for ARA gas detectors. insertion of ARA gas detectors is
detected through IrDA communication.
Test LED is a 2-colour-LED and shows red/green/orange. It shows
the Bump or CAL Test result of ARA gas detectors inserted into
each Test Bay.
Vdc 12V, 1.5A Adaptor Connector, 5.5/2.1pi
RJ45 with 2 LEDs. LEDs indicate Link and Active status.
USB 2.0 type B Receptacle.
1/8" Hose Barb coupler. Used to supply fresh air.
1/8" Hose Barb coupler. Gas and fresh air used in the test are
exhausted here.
Gauge for checking Gas remaining. Max 1,500 psi
496.8 x 340 x 115 mm (20.0 x 13.4 x 4.5 in)
7 kg, (/wo gas cylinder)
Aluminium
5℃ ~ 40℃ (+41°F to +104°F)
10% to 90% non-condensing
1,000m (3,280.84ft)
-10℃ ~ 60℃ (+14°F to +140°F)
Supply Voltage:
- Input: 110-240V a.c, 50/60Hz Max 0.5A
- Output: 12 V d.c, 1.5A
Power Rating
- 12 V d.c, 1.5A (Adapter)
- 7.4V d.c., 2,750mAh (Internal Battery)
Process Control Equipment
Pollution Degree 2
Installation Category I
Provide time and date stamp
Page 6 of 15
ARA DOCK4 User Manual V1.0
ionscience.com