Troubleshooting; Limited Warranty; Certifications / Approvals - ION shawcity ARA DOCK4 User Manual

Troubleshooting

Problem
The ARA DOCK4 does not activate.
Bump test fails and gas leaks out.
Bump test fails and gas pressure gauge is
almost zero
Gas cylinder does not fit to tubing and cannot
be installed to ARA DOCK4.
Power Buttons is blinking red
The audible alarm test fails during bump test or
calibration.
The visual alarm test fails during bump test or
calibration.

Limited Warranty

Certifications / Approvals:

CE, FCC, UKCA, UL (pending)
Pioneering Gas Sensing Technology.
Connect the power adapter.
Confirm that all gas connections are
attached correctly.
Replace the empty gas cylinder.
Inspect the tubing and replace with new one if
it is damaged.
Check if the USB Memory is properly installed.
Clean the audible alarm hole
1) clean the ARA unit's LEDs
2) clean the visual alarm hole in test bays
Page 14 of 15
ARA DOCK4 User Manual V1.0
Solution
ionscience.com