Operate The Ara Dock4; Turn On/Off The Ara Dock4 - ION shawcity ARA DOCK4 User Manual

WARNING: Be sure that tubing is not too long and is not blocked.
WARNING: Ensure the exhaust tubing is not connected to a negative pressure system.
Purge Inlet - 1/8" Tube connect to Clean Air

Operate the ARA DOCK4

Turn on/off the ARA DOCK4

Press the Power Button to turn on the ARA DOCK4. If it is powered, the Power Button will light up
according to the ARA DOCK4status.
1) The ARA DOCK4 can be operated when the Power Button lights up green.
2) The ARA DOCK4 will automatically turn itself off if it is idle for long time.
- If User configures not to allow turning itself off, Press the Power Button more than 5 sec
and release to turn it off.
- If the ARA DOCK4 is not powered or the Power Button is blinking green, Connect the DC
power adapter.
- If the Power Button keeps orange colour, wait until FW Upgrade finishes.
- If the Power Buttons is blinking red, check if the USB Memory is properly installed.
Pioneering Gas Sensing Technology.
Exhaust Outlet - 1/8" Tube connect to ventilation
Page 10 of 15
ARA DOCK4 User Manual V1.0
ionscience.com