Table of Contents
Advertisement
•
Screen Sync: If enabled, the system will keep the current settings after
the device wakes up from standby or sleeping mode (via DP or Type-C
connection).
•
Key Lock: Selects "On" to disable all function keys. To cancel the Key
Lock function, press the
page 1-2 for the location of the
•
Power Indicator: Turns the power LED indicator on/off.
•
Ambient Effect: Configures the ambient effect settings.
»
»
•
Proximity Sensor: If the function is enabled and the system does not
detect the presence of object within 30cm-1.5m over the preset time, the
system will automatically decrease brightness periodically.
•
Screen Protection: Ensure the life cycle of panel by decreasing brightness
gradually.
•
Information: Shows the monitor information.
•
All Reset: Selects "Yes" to revert all settings to the factory default mode.
3-12
Light Effect: Adjusts the brightness level adaptively.
Adaptive Color: Adjusts the color temperature adaptively.
This function will be disabled if the HDR function is enabled and the
ProArt Preset setting is set to HDR_PQ DCI, HDR_PQ Rec2020,
HDR_HLG BT2100, HDR_HLG DCI, or HDR_DolbyVision.
Recovery time should be within 2 seconds.
This function will be disabled if the ProArt Preset setting is set to
HDR_PQ DCI, HDR_PQ Rec2020, HDR_HLG BT2100, HDR_HLG DCI,
or HDR_DolbyVision.
Close button for more than five seconds. See
Close button.
Chapter 3: General Instruction
Advertisement
Table of Contents
