Introduction; How To Use This Manual; Equipment Identification; Receipt Of Equipment - Ametek POWER PRO FERRO 80 Series Owner's Manual

INTRODUCTION

How To Use This Manual

IMPORTANT: It is especially
important that all charger
internal components be kept
clean and dry, and all
electrical connections as
tightened as instructed in the
Maintenance chapter of this
manual. Replace any
precautionary or instruction
label that cannot be easily
read
.
Throughout this manual, the words WARNING,
CAUTION, and NOTE may appear. Pay particular
attention to the information provided under these
headings. These special annotations are easily
recognized as follows:
WARNING gives information
regarding possible personal
injury. Warnings will be
enclosed in a box such as this.
November 17, 2020
CAUTION refers to possible equipment
damage. Cautions will be shown in bold
type.
NOTE offers helpful information concerning
certain operating procedures. Notes will be
shown in italics.

Equipment Identification

The unit's identification number (specification, model,
serial number) usually appears on a nameplate
attached to the front panel.

Receipt Of Equipment

When you receive the equipment, check it against the
invoice to make sure it is complete and inspect the
equipment for possible damage due to shipping. If
there is any damage, notify the carrier immediately to
file a claim. Furnish complete information concerning
damage claims or shipping errors to the company
shown on the cover of this manual. Include all
equipment identification numbers and group part
numbers (if any) as described above along with a full
description of the parts in error.
Move the equipment to the site of installation before
uncrating. Use care to avoid damaging the equipment
when using bars, hammers, etc., to uncrate the unit.
Additional copies of this manual may be purchased by
contacting Ametek/Prestolite Power Troy OH 45373,
include the Owner's Manual number and equipment
identification numbers.
193111-050
INTRODUCTION
1-1