Ametek POWER PRO FERRO 80 Series Owner's Manual page 3

NOTE: Information regarding obtaining additional copies of this manual is located in the Introduction
chapter of this manual.
A battery charger is identified by model number. Incorporated into the model number is the 8-hour
ampere-hour capacity, case size, input power phase, and number of cells in battery for which charger is
intended. The following example explains the basic model numbering arrangement.
Model 12 -
NOTE: This information is required for ordering certain replacement/service parts.
750 FR 80
Ferroresonant
Ampere-Hour Capacity in 8 Hours
Number of Cells
T
1 Phase Input Power – S
3 Phase Input Power – T
80% Rated Suffix