Clevertronics TS EUBPRO-LI Installation & Maintenance Instructions

THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK
Instruction Sheet Template - V1.2 – Updated 06/10/2021
Trade Series Ultrablade Pro LED Exit
Installation & Maintenance Instruction Leaflet
Designed in Australia to comply with the requirements of
AS2293.3: 2005 and AS/NZS CISPR15: 2017
Models: EUBPRO-LI
Spare Parts:
1560200 Battery, 3.2 Volt 1.1Ah Li-ion
8002179 PCA:EUBPRO LED Strip Assy (CT10602-x)
2740054 Ultrablade to Ultrablade Pro adapter
AUM03570010001 EUBPRO-CKIT-LI Ultrablade Pro,Control Only, Eco Li, M/NM
Important:
It is illegal for anyone, except for a licensed electrician to install or maintain this product. Before installation,
ensure that the electricity supply has been switched off and isolated. Installation must be carried out in
accordance with the relevant Australian and International Standards.
Victoria (Head Office & Manufacturing)
Website: www.clevertronics.com.au
Email: info@clevertronics.com.au
Phone: +61 3 9559 2700
Fax: +61 3 9559 2799
New South Wales
Phone: +61 2 8805 6400
Fax: +61 2 8805 6444
Queensland
Phone: +61 7 3442 9700
Fax: +61 7 3442 9777
South Australia/Northern Territory
Phone: +61 8 8301 8800
Fax: +61 8 8351 8286
Western Australia
Phone: +61 8 9207 0000
Fax: +61 8 9207 0088
New Zealand
Phone: +64 800 548 448
1943063 V1.1 12 January 2022