HP Net Vectra Supplementary Manual page 3

Vectra Product Overview
Component
Microprocessor
VRM
Cooling
Main memory
Graphics controller
Communications
ports
Mass storage
Accessory board
slots
CD-ROM drive
Flexible disk drive
Operating system
Power supply
Pentium processor, 166 MHz or 200 MHz, 256 KB of level-2 cache memory
integrated on system board
Voltage regulator integrated on the system board
Heat pipe to conduct heat from the processor
Fan cooling on the power supply
32 MB or 16 MB (standard), 192 MB (maximum).
60 ns SDRAM (Synchronous DRAM). Three DIMM sockets.
S3 Trio 64 V2 integrated on the system board, with 2 MB video memory not
upgradeable
2 USB (Universal Serial Bus) connectors with ACPI support
(Advanced Configuration and Power Interface),
and legacy I/O ports (1 serial port, parallel port, keyboard, mouse)
Ultra DMA/33 IDE controller
to support the 1.6 GB Ultra ATA/33 IDE drive on some models
and the standard 1.0 GB EIDE on other models
2 internal shelves for hard disk drives, no front access shelves
2 PCI slots
none!
none!
Windows NT 4.0 WS
Switch selectable 120/230 VAC, 100 W input, 80 W output,
(with ACPI support)
HP Net Vectra PC
Vectra Product Overview
3