HP Media Center,Pavilion Media Center m8150 Troubleshooting Manual page 31

6 Choose to run from the recovery discs, and then
click Next.
7 In the Welcome window, click Next.
8 Click No to perform a system restore, and then
click Next.
9 If you are prompted to back up your files and you
have not done so, click Yes. Otherwise, click No,
and then click Next.
10 Insert the next recovery disc if you are prompted
to do so.
11 When the Recovery Manager is finished, remove
the last recovery disc.
12 Click Finish to restart the computer.
Performing the post-recovery procedure
1 At the Welcome to Microsoft Windows screen,
follow the onscreen setup instructions, and then
click Start in the last screen to display the
Windows desktop.
2 Configure your Internet connection.
3 Turn off your computer, reconnect all devices that
were originally connected to it, and then restart
the computer.
4 Reinstall software that originally came in the box
with your computer, and also any additional
software you purchased.
The system recovery software might have
already installed some of the software that
came in the box.
If you installed updates to any software
programs, reinstall those as well. You can
typically download these updates from the
software manufacturer's Web site.
5 Use Windows Update to get critical updates from
Microsoft:
a Click the Windows Start Button, and
Control Panel.
b Under Security, click the Check for
Updates button.
c Download and install updates by clicking
Install Updates.
6 Restart your computer. (Some updates will not
finish installing until you restart.)
7 Use HP Update to get critical updates from HP:
a Click the Windows Start Button,
All Programs, the HP folder, and then
HP Update.
b Follow the onscreen instruction to download
driver and software updates.
8 If you performed a backup before the system
recovery, copy the backup data files from the
backup media to your hard disk drive.
9 Ensure your system is running up-to-date security
software.
Repairing Software Problems
27