Related Manuals for Trotec BI15
Summary of Contents for Trotec BI15
- Page 1 BI15 DA FI NO SV RU BEDIENUNGSANLEITUNG OPERATING MANUAL MANUEL D'UTILISATION...
-
Page 2: Table Of Contents
Warns of injury risk from laser radiation. Disposal ............B - 10 Declaration of conformity........ B - 10 Caution! Warns of a hazard which can lead to dam- age to property. B - 1 Operating manual - Locating device BI15... -
Page 3: Safety
This document was created with Trotec accepts no liability for damages resulting from all due care. Trotec accepts no liability whatsoever for improper use. In such a case, entitlements to a warranty possible mistakes or omissions. © Trotec are forfeited. - Page 4 • have read and understood the operating manual, es- pecially the Safety chapter. Risk from laser radiation! • Do not look into the laser beam. Do not point the de- vice at people. B - 3 Operating manual - Locating device BI15...
-
Page 5: Technical Data
33-55 % Maximum detection depth for wood up to 19 mm (3/4") Maximum detection depth for metal + live cables up to 38 mm (1 1/2") Power supply 9 V battery B - 4 Operating manual - Locating device BI15... -
Page 6: Description Of The Device
Description of the device Functional description Using the locating device BI15, cables, wooden beams or metal braces to a depth of 19 mm can be located in walls or floors. The exact position of beams and braces is detected and shown in the display as edges. The laser pointer rotates by 180°... - Page 7 Display 10. Device is ready 11. AC power detection 12. Metal detection 13. Battery indicator 14. Wood detection 15. Edge reached 16. Laser pointer on B - 6 Operating manual - Locating device BI15...
-
Page 8: Operation
– The "WOOD" (14) or "METAL" (12) symbols flash depending on which material was set beforehand. – After 3 seconds, a beep is emitted and the "READY" symbol (10) appears. The calibration is complete. B - 7 Operating manual - Locating device BI15... - Page 9 (see figure on page B - 6). The device switches off as soon as you release the "On" – If an edge is detected, the "EDGE" symbol (15) ap- button (8). pears and a beep is emitted. B - 8 Operating manual - Locating device BI15...
-
Page 10: Maintenance And Repair
Make certain that the surface of the device cloth. is dry and the device is switched off. Repair Do not modify the device or install any spare parts. For repairs or device testing, contact the manufacturer. B - 9 Operating manual - Locating device BI15... -
Page 11: Disposal
2004/108/EC about electromagnetic compatibility. We ally in accordance with Directive 2002/96/ hereby declare that the locating device BI15 was EC of the European Parliament and Council of 27th Jan- designed, developed and produced in compliance with uary 2003 concerning old electrical and electronic the named EC Directive.