Hagerman Audio Labs FRYBABY3 Quick Start Manual page 5

5
FRYBABY3 Compact Burn-in Generator
Connections
The FryBaby3 is designed to burn-in and condition cables offline. It can also be used as a
signal generator to break-in amplifiers or other electronics.
RCA
First, do a voltage burn by connecting the cable pair directly to the outputs. Set to ON.
After the voltage burn, do a current burn by connecting cables in loops, from red to
white output, or from signal to ground-shield (red to black using binding posts).
XLR
For balanced cables, you the ground lug for shield, and connect red and white outputs
to signal conductors. This will require adapters (not included).