Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hagerman Audio Labs FRYBABY2
Summary of Contents for Hagerman Audio Labs FRYBABY2
- Page 1 FRYBABY2 Compact Burn-in Generator Made in USA...
-
Page 2: Copyrights And Trademarks
FRYBABY2 Compact Burn-in Generator Copyrights & Trademarks Copyright Hagerman Audio Labs 2014. All rights reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent. Disclaimer The information contained in this document is subject to change without notice. -
Page 3: Specifications
FRYBABY2 Compact Burn-in Generator Description The FryBaby2 audio system conditioner is a burn-in signal generator designed especially for cables and interconnects. It can also be used to burn-in linestages, phonostages, and amplifiers. The sophisticated electronic waveform – a combination of wideband noise and variable frequency amplitude modulation – is designed to exercise both low and high frequency characteristics of conductors and insulators. -
Page 4: Operation
FRYBABY2 Compact Burn-in Generator Operation The FryBaby2’s control knob sets the mode of operation. MC selects an output level suitable for driving moving coil phonostage inputs (-60dB), MM for moving magnet phonostages (-40dB), and ON for everything else (line level). The internal LED blinks at the rate of modulation. -
Page 5: Troubleshooting
FRYBABY2 Compact Burn-in Generator Connections The FryBaby2 is designed to burn-in and condition cables offline. It can also be used as a signal generator to break-in amplifiers or other electronics. The FryBaby2 can burn in a stereo pair of interconnects by using the female-to- female adapter at the far end.