Hagerman Audio Labs warrants this product free of defects in materials and workmanship for a period of 10 years. If you discover a defect, Hagerman Audio Labs will, at its option, repair or replace the product at no charge to you provided you return it during the warranty period, transportation charges prepaid to Hagerman Audio Labs.
FRYBABY3 Compact Burn-in Generator Description The FryBaby3 audio system conditioner is a burn-in signal generator designed especially for cables and interconnects. It can also be used to burn-in linestages, phonostages, and amplifiers. The sophisticated electronic waveform – a combination of wideband noise and variable frequency amplitude modulation –...
FRYBABY3 Compact Burn-in Generator Operation The FryBaby3’s control knob sets the mode of operation. MC selects an output level suitable for driving moving coil phonostage inputs (-60dB), MM for moving magnet phonostages (-40dB), and ON for everything else (line level). The internal LED blinks at the rate of signal modulation, which is continuously speeding up and slowing down.
Page 5
FRYBABY3 Compact Burn-in Generator Connections The FryBaby3 is designed to burn-in and condition cables offline. It can also be used as a signal generator to break-in amplifiers or other electronics. First, do a voltage burn by connecting the cable pair directly to the outputs. Set to ON.
FRYBABY3 Compact Burn-in Generator Speaker Cables Connect the supplied binding post adapters to the RCA outputs (red and white). Red binding post is hot, black is return (also connected to grounding post). Headphones Use the supplied 3.5mm stereo jack adapter to connect your headphones. Set output to Phonostage, Linestage, Amplifier Amplification electronics are burned in using voltage mode.