Table of Contents
Advertisement
Set Intervals for your job
If everything is working properly, you can now set up the machine to process your jobs.
Most people set the machine to fold a certain number, then pause so the operator can
take that set out and either put a rubber band around it (See picture on page 15) or
put it in another container, then continue after a set delay.
To do that you will need to decide how many folded pieces to accumulate in a set.
Then go to
SET A PAUSE AFTER A CERTAIN NUMBER OF FOLDS on page 11.
There you can set the machine to stop after every X folds, pause for the time you set,
and then continue until the paper runs out.
MAINTENANCE OF THE STACKER
Periodically clean the moving belts and wipe off the machine with a damp cloth. No
other maintenance is required.
Page
21
Paperfolder.com PH-1 User manual
Advertisement
Table of Contents
