Table of Contents
Advertisement
Setting up the Stacker
Remove the stacker from the box. Place it on a table at the rear of the PH-1 with the
output conveyor removed. It should be as close as possible to the folding machine and
in line.
Parts included with the stacker:
a. Electrical cord
b. Side guides
c. Stack accumulator (Catch Stop)
The stacker includes 2 guides that must be set. Loosen the black side knobs, and
position the guides vertically as shown. Tighten. Loosen the top knobs and move them
close to (but not touching) the 2 green belts. Tighten.
Page
19
Paperfolder.com PH-1 User manual
Advertisement
Table of Contents
