Adjusting The Image Height - Epson EMP 51/L User Manual

Zoom in
or out
Adjust
position
of zoomed
portion
caution
To avoid damaging the lens,
do not lift the projector by the
lens.
Using the Projector
30
Using the E-Zoom Button
If you want to zoom in on a portion of the image, use the
and buttons on the remote control. Press the
Enter
button to zoom into your image in small increments. Press
E-Zoom
the side to zoom out.
–
To position the zoomed image on the screen, press the top, bottom,
left, or right side of the
to return your image to its original size and turn off E-Zoom.)
Esc
E-Zoom button
+
Zoom in
–
Zoom out

Adjusting the Image Height

If your image is too low, you can raise it by extending the projector's
feet.
1. Stand behind the projector. Pull up the blue foot release levers
and lift the front of the projector. This unlocks the feet.
2. Raise or lower the front of the projector as necessary.
button on the remote control. (Press
Enter
Enter button
left
bottom
E-Zoom
side of the
+
top
right